/* UIDIGI Configuration source file Version 1.8 BETA 6 20000930 Written by Marco Savegnago IW3FQG */ //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Set the digipeater ax.25 address callsign (SSID allowed) // Up to 6 characters+SSID // Digicall [t] DigipeaterCallsign = AI5TX-2 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Set the digipeater address alias // Up to 6 characters (NO SSID) // DIGIAlias [t] DigipeaterAlias = 3AC //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Digipeater Info Text up to 80 char // Info [t] // 12345678901234567890123456789012345678901234567890123456789012345678901234567890 InfoText = Armadillo Intertie, Inc. WWW.ARMADILLO.ORG UIDIGI 1.8 BETA 6 Houston, TX USA //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Path used when SSID routing is used (Up to 8 hops) // (Direction) Path // xpath [path] NorthPath = SouthPath = EastPath = WestPath = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // BudList Calls (up to 8 calls, default none) // All SSID's of base call will be ignored // BUdlist [calls] BudList = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Generic Calls (up to 8) // Calls recognized by digi to repeat // Default (RELAY, WIDE, TRACE) // Uidigi [calls] UIDigiCall = RELAY, WIDE, TRACE //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Flood Call (up to 6 characters) // Default (WIDE) // UIFlood [call] UIFloodCall = WIDE //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Trace Call (up to 6 characters) // Default (TRACE) // UITrace [call] UITraceCall = TRACE //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Txdelay (default 30 = 300) // range 1-255 x10ms // TXdelay [n] TxDelay = 30 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Fullduplex (default 0) // Enables (1) or Disables (0) // NO COMMAND FROM CONSOLE FullDuplex = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // PPErsistence (default 64) // range 1-255 // Parameter fo channel access timing // PErsistance [n] PPersistance = 64 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Slottime (default 10) // range 1-255 x100ms // SLottime [n] SlotTime = 10 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Frack (default 5) // range 1-15 // Frack [n] Frack = 5 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Maxframe (default 4) // range 1-7 // MAxframe [n] Maxframe = 4 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Retry (default 10) // range 0-127 // RETry [n] Retry = 10 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // RespTime 2 (default 100) // range 0-6000 ms // RESPtime [n] RespTime = 100 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Link Check (default 18000) // range 0-65535 ms // CHeck [n] LinkCheck = 18000 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Duplicate Packet Suppression Interval second (default 28) // range 0-180 seconds // UICheck [n] DuplicateSuppression = 25 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Loop Packet Suppression Interval Mask (default 3) // 0x01 = Do not repeat frame with source address equal to digipeater call or alias // 0x02 = Do not repeat frame with the digipeater call in the already digipeated via list // range 0-3 // UILoop [n] LoopSuppression = 3 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Treat different SSID in destination call (default 1) // Enables (1) or Disables (0) UISSID digipeating mode // Used for SSID Directional routing // UISsid [n] // SSID digipeating works in the same way as N-N digipeating EXCEPT // No path must be specified. The number of hops is in the destination // call. Example: Destination KC5EVE-3 is the same as Wide3-3. HandleUISSID = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Reply to Query (default 1) // Enables (1) or Disables (0) ?APRS? response query // UIQuery [n] ReplyToQuery = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UIFLOOD Algorithm flag (default 0) // bit 0 make call substitution after the last WIDEn-n digied // bit 1 insert callsign before WIDEn-n // UIFLDfl [n] UIFLOODOptions = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UITRACE Algorithm flag (default 0) // bit 0 makes call substitution after the last TRACEn-n digied // bit 1 Disables // UITRFl [n] UITRACEOptions = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Make call substitution when repeat frames addressed to UIDIGI Callsign // default (1) // Enables (1) or Disables (0) UIDIGI callsign substituion for UIDIGI calls // UIDCsb [n] UIDIGICallSubstitution = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempt calls (default none) // see docs PreemptCalls = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempt add (default none) // see docs PreemptAdd = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempte Digipeater (default 0) // see docs PreeemptedDigipeat = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // PID of processed frames (default 240) // Enable frame filtering algorithm base on PID of frame // 0 disables // range 0-255 // UIPid [n] UIPID = 240 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Sysop Password up to 80 char // NO CONNAMD FROM LOCAL CONSOLE SysopPassword = putremoteaccesspasswordhere //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Beacon x interval Seconds // default 1 = 600 // default 2 = 1800 // default 3 = 3600 // range 0-65535 seconds // BEacon [x] [n] Beacon1Interval = 3600 Beacon2Interval = 3600 Beacon3Interval = 3600 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Beacon x offset (default 0) // range 0-65535 seconds // BEACONOffset [x] [n] Beacon1Offset = 0 Beacon2Offset = 1200 Beacon3Offset = 2400 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Digipeater Beacon x Text up to 70 char // see APRS reference doc for layout // BText [n] [t] // After the N is the OVERLAY and after the W is the ICON..UIDIGI should // Use U and # // for proper PHG number go to www.cheavens.com/mark/radio/packetradio // and find the PHGAPRS.xls spreadsheet // // 1234567890123456789012345678901234567890123456789012345678901234567890 Beacon1Text = !2945.62NU09522.17W#PHG9550 APRS DIGI UIDIGI 1.8b6 Houston b1 Beacon2Text = !2945.62NU09522.17W#PHG9550 Contact mcheavens@usa.net b2 Beacon3Text = !2945.62NU09522.17W#PHG9550 Public Srvc by Armadillo Intertie, Inc. b3 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Destination ax.25 address of beacon (6 characters + SSID) // See APRS working group documentation APZ=experimental // UNproto [t] // APNU is for UIDigi and 18 is the software version BeaconDestination = APNU18 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // AX.25 Beacon x path (up to 8 hops) // Path that Beacon x will be sent out with // Bdl [x] [path] Beacon1Path = WIDE5-5 Beacon2Path = WIDE Beacon3Path = WIDE AuxPath = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Destination ax.25 address of aux input device string // Up to 6 characters + SSID AuxDestination = AUX //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Aux Beacon interval (default 0) // Sets the interval for the beacon of aux input data // AUXRate [n] AuxRate = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- //----------------------------------------------------------------------- //-----------------------------------------------------------------------